GypDecor/ GypDecor AQUA Ceiling
Lightweight Ceiling Systems Available in T-bar Framing
GypDecor/ GypDecor AQUA ceilings are lightweight ceiling systems available in T-bar framing. They present an attractive pre-finished surface by selecting plasterboard tiles, available in paint or PVC laminated finishes.
Key facts
- Easy to install, maintain and repair
- High level of design flexibility
- Wide range of ceiling tiles giving textured surfaces
- Easy cleaning with PVC laminated finish
Application
Due to the design flexibility of the T-bar system, this ceiling system can be tailored to meet the requirements of a wide range of applications.
Sectors
Office 
Education 
Healthcare 
Residential Performances
Superior Aesthetics & Design
Installation overview
Determine the height at which the suspended ceiling will be installed. Fix wall angle VT18/22 on the wall with the appropriate fixing.
Install the suspension rod to the main runner VT-Topline Plus 3660/3600 every 1000mm, with spacing of 1220/1200mm between the main runners, ensuring a maximum of 610/600mm spacing from the wall angle VT18/22.
Determine the location of the cross runner VT-Topline Plus 1220/1200 and VT-Topline Plus 610/600 according to the configuration you selected (either 600x600mm and 610x610mm or 600x1200mm and 610x1220mm) and install the cross runner by inserting its ends into the slots in the main runner.
Starting from the centre of the room, drop the ceiling tiles into position by tilting them slightly, lifting them above the framework and letting them fall into place.
For full installation details, please refer to the site book.
Related products
GypDecor/ GypDecor AQUA Ceiling can be used with the following products
