DuraDecor
T-Bar Ceiling System with Calcium Silicate Board DURAflex
DuraDecor is a T-bar ceiling system that presents an attractive pre-finished surface by using the Calcium Silicate DURAflex tile. It is available in painted and PVC laminated finishes with a variety of designs.
Key facts
- Good water absorption
- Easy to install, maintain and repair
- High level of design flexibility
- Wide range of ceiling tiles giving textured surfaces
- Easy cleaning with PVC laminated finish
Application
Due to the design flexibilityof the T-bar system, DuraDecor ceiling system using the Calcium Silicate DURAflex Board can be tailored to meet the requirements of a wide range of applications in different types of buildings. This system is particularly good for wet areas such as bathrooms or kitchens.
Sectors
Office 
Healthcare 
Education 
Residential Performances
Superior Aesthetics & Design
Installation overview
Determine the height at which the suspended ceiling will be installed. Fix wall angle VT18/22 on the wall with the appropriate fixing.
Install the suspension rod to the main runner VT-Topline Plus 3660/3600 every 1000mm, with spacing of 1220/1200mm between the main runners and ensuring a maximum of 610/600mm spacing from the wall angle VT18/22.
Determine the location of the cross runner VT-Topline Plus 1220/1200, VT-Topline Plus 610/600 by the configuration you selected: either 600x600mm and 610x610mm or 600x1200mm and 610x1220mm; install the cross runner by inserting its ends into the slots in the main runner.
Starting from the centre of the room, drop the ceiling tiles into position by tilting them slightly, lifting them above the framework and letting them fall into place.
For full installation details, please refer to the site book.
Related products
DuraDecor can be used with the following products
